Bảo dưỡng be tông tiếng anh là gì năm 2024

Do đó, tất cả các phương pháp bảo dưỡng bê tông đều bắt nguồn từ nguyên tắc cơ bản là hạ nhiệt độ bề mặt và ngăn ngừa sự bay hơi nước.

Thus all the methods of curing of concrete are derived from the basic principle of lowering of the surface temperatures and prevention of water evaporation.

Bảo dưỡng bê tông bằng nước ngăn ngừa mất độ ẩm quá mức vì nước sẽ tạo ra một lớp trong thời gian dài có thể kiểm soát sự bốc hơi của độ ẩm từ bề mặt.

Curing concrete with water prevents excessive loss of moisture as the water will create a layer for an extended period of time that can control the evaporation of moisture from the surface.

Sau thời gian bảo dưỡng bê tông ban đầu kết thúc, lớp bê tông nhão trên bề mặt có thể làm sạch bằng bàn chải và nước sạch để làm trơ cốt liệu.

After the initial cure of the concrete has elapsed,the soft cement paste on the surface can be brushed off and the aggregate exposed with clean water.

Nội dung công việc: Bảo dưỡng, thay thế lớp bê tông cho Primary Reformer và Secondary Reformer.

C oncrete sàn burshing l ight trọng lượng máy vàba giai đoạn đặc biệt là áp dụng cho bê tông đánh bóng và bảo dưỡng;

Concrete floor burshing machine light weight andthree phase especially apply to concrete polishing and maintenance;

Khi bạn xem xét chi phí bảo dưỡng và bảo trì, đánh bóng sàn bê tông là giải pháp sàn hiệu quả nhất.

When you consider the cost of upkeep and maintenance, polishing concrete floors is the most cost effective flooring solution.

Đối với một sân bay lớn, nơi các điều kiện mặt đất cho phép,loại vỉa hè thỏa đáng nhất để bảo dưỡng tối thiểu lâu dài là bê tông.

For a major airport, where the ground conditions permit,the most satisfactory type of pavement for long-term minimum maintenance is concrete.

Ngoài việc bảo dưỡng đất mới, việc chuyển đổi bê tông, terrazzo, và đất nonery, đặc biệt là epoxy cũ, đã trở thành một xu hướng.

In addition to the new ground curing, the transformation of concrete, terrazzo, and emery ground, especially old epoxy, has become a trend.

Để sản phẩm đạt tính năng tối ưu, nên thi công KKS ®CURING 815 sớm ngay sau khi bê tông đã sẵng sàng bảo dưỡng và sử dụng với định mức vừa đủ, tránh bị đọng vũng.

For optimal performance,KKS® CURING 815 should be applied immediately after the concrete is ready for maintenance and use at a sufficient level, avoiding puddles.

Nếu bê tông không được chuẩn bị và bảo dưỡng đúng cách trước khi lắp đặt hệ thống sàn mới, nhiều vấn đề có thể phát sinh, bao gồm:

If concrete is not properly prepped and maintained before laying new flooring system, many problems can arise, including:

Để đảm bảo chất lượng của bê tông trong quá trình trộn, vận chuyển, đặt, và bảo dưỡng;

To ensure the quality of concrete during mixing, transporting, placing, and curing;

Thay vào đó, vai trò của họ phần lớn sẽ là thể hiện sự tồn tại của quân đội quốc phòng, bao gồm hỗ trợ trực thăng cho các cơ quan vùng biên,lắp đặt rào cản bê tông, sửa chữa và bảo dưỡng phương tiện.

Instead, their role largely will mirror that of the existing National Guard troops, including providing helicopter support for border missions,installing concrete barriers and repairing and maintaining vehicles.

Kết cấu thép có thể được dựng lên ngay saukhi các vật liệu được cung cấp trên thân thép, trong khi bê tông phải được bảo dưỡng ít nhất 1- 2 tuần sau khi đổ trước khi xây dựng có thể tiếp tục, làm cho thép vật liệu có lịch trình xây dựng đảm bảo tiến độ tốt nhất.

Structural steel can be erected assoon as the materials are delivered on site, whereas concrete must be cured at least 1- 2 weeks after pouring before construction can continue, making steel a schedule-friendly construction material.

Các vòi phun sương và phun sương được sử dụng để làm nước cây, thực phẩm ăn mòn,sương mù lên bê tông để tạo điều kiện bảo dưỡng, tạo ra hiệu ứng sương mù cho các sản phẩm sân khấu, phun sương dầu để bôi trơn vòng bi, và nhiều ứng dụng khác.

Misting and fogging nozzles are used to water plants, coat foodstuffs,mist onto concrete to facilitate curing, produce fog effects for theatrical productions, spray oil mist to lubricate bearings, and many other applications.

Bê tông thương phẩm được mua từ các nhà máy sản xuất bê tông chuyên nghiệp, mẫu bê tông được lưu giữ, bảo dưỡng và thí nghiệm cường độ nénbê tông đúng theo quy định.

Concrete products purchased from the professional concrete factory, concrete samples are kept, maintenance and testing concrete compressive strength in accordance with regulations.

Bằng việc tuân thủ theo một số bước đơn giản trước và sau khi đổ bê tông, bạn sẽ thu được kết cấu bê tông đẹp mà chỉ yêu cầu bảo dưỡng rất ít, và mang lại cho bạn những năm tháng hài lòng.

By following a few simple steps before and after you place the concrete, you will have a very nice looking structure that will require very little maintenance, and give you years of enjoyment.

Sửa chữa cấu trúc bằng cách tạo ra các điều kiện thuận lợi màsau này không thể làm được, vì vậy bảo dưỡng đúng bê tông ở tuổi sớm là điều kiện cần thiết để đạt được bê tông có chất lượng tốt, nhất là GKN thuộc sản phẩm có mô đun bề mặt lớn.

Repairing the structure by creating favorable conditions that could not be done later,so proper concrete curing at an early age is necessary to achieve good quality of concrete, especially NFBs are belonging to products having a large surface module.

Nhờ sử dụng KKS ® PLASTAD500 có thể sản xuất bê tông chất lượng cao nhất, tuy nhiên các qui trình của công nghệ bê tông như trộn, đổ, đầm rung, bảo dưỡng phải được tuân thủ và áp dụng.

Using KKS® PLASTAD500 can produce the best quality of concrete. However, it should be complied and applied with standard procedures on mixing, placing, vibrating, curing for concrete.

Nhờ sử dụng KKS ® ULTRAD 600 có thể sản xuất bê tông chất lượng cao, tuy nhiên các qui trình của công nghệ bê tông như trộn, đổ, đầm rung, bảo dưỡng phải được tuân thủ và áp dụng.

With the use of KKS® ULTRAD 600, concrete of highest quality is being produced, it should be complied and applied with standard procedures, such as mixing, placing vibrating and curing must be respected and applied.

Nhờ sử dụng KKS ® POLYMAD700 có thể sản xuất bê tông chất lượng cao nhất, tuy nhiên các qui trình của công nghệ bê tông như trộn, đổ, đầm rung, bảo dưỡng phải được tuân thủ và áp dụng.

With the use of KKS® POLYMAD 700, concrete of highest quality is being produced, it should be complied and applied with standard procedures, such as mixing, placing vibrating and curing must be respected and applied.

Các kỹ thuật đặc biệt được sử dụng cho bê tông trong thời tiết cực lạnh hoặc nóng để bảo dưỡng bê tông.

Special techniques are used for curing concrete during extremely cold or hot weather to protect the concrete.