Of the following choices which is the best situation for using a comment tag

The

HTML element represents a paragraph. Paragraphs are usually represented in visual media as blocks of text separated from adjacent blocks by blank lines and/or first-line indentation, but HTML paragraphs can be any structural grouping of related content, such as images or form fields.

Paragraphs are block-level elements, and notably will automatically close if another block-level element is parsed before the closing

tag. See "Tag omission" below.

Content categories, palpable content.Permitted content.Tag omissionThe start tag is required. The end tag may be omitted if the

element is immediately followed by an

,
,
<p>Separating paragraphs with blank lines is easiest
for readers to scan, but they can also be separated
by indenting their first lines. This is often used
to take up less space, such as to save paper in print.p>

<p>Writing that is intended to be edited, such as school
papers and rough drafts, uses both blank lines and
indentation for separation. In finished works, combining
both is considered redundant and amateurish.p>

<p>In very old writing, paragraphs were separated with a
special character: ¶, the <i>pilcrowi>. Nowadays, this
is considered claustrophobic and hard to read.p>

<p>How hard to read? See for yourself:
  <button data-toggle-text="Oh no! Switch back!">Use pilcrow for paragraphsbutton>
p>
0,
<p>Separating paragraphs with blank lines is easiest
for readers to scan, but they can also be separated
by indenting their first lines. This is often used
to take up less space, such as to save paper in print.p>

<p>Writing that is intended to be edited, such as school
papers and rough drafts, uses both blank lines and
indentation for separation. In finished works, combining
both is considered redundant and amateurish.p>

<p>In very old writing, paragraphs were separated with a
special character: ¶, the <i>pilcrowi>. Nowadays, this
is considered claustrophobic and hard to read.p>

<p>How hard to read? See for yourself:
  <button data-toggle-text="Oh no! Switch back!">Use pilcrow for paragraphsbutton>
p>
1,
<p>Separating paragraphs with blank lines is easiest
for readers to scan, but they can also be separated
by indenting their first lines. This is often used
to take up less space, such as to save paper in print.p>

<p>Writing that is intended to be edited, such as school
papers and rough drafts, uses both blank lines and
indentation for separation. In finished works, combining
both is considered redundant and amateurish.p>

<p>In very old writing, paragraphs were separated with a
special character: ¶, the <i>pilcrowi>. Nowadays, this
is considered claustrophobic and hard to read.p>

<p>How hard to read? See for yourself:
  <button data-toggle-text="Oh no! Switch back!">Use pilcrow for paragraphsbutton>
p>
2,
<p>Separating paragraphs with blank lines is easiest
for readers to scan, but they can also be separated
by indenting their first lines. This is often used
to take up less space, such as to save paper in print.p>

<p>Writing that is intended to be edited, such as school
papers and rough drafts, uses both blank lines and
indentation for separation. In finished works, combining
both is considered redundant and amateurish.p>

<p>In very old writing, paragraphs were separated with a
special character: ¶, the <i>pilcrowi>. Nowadays, this
is considered claustrophobic and hard to read.p>

<p>How hard to read? See for yourself:
  <button data-toggle-text="Oh no! Switch back!">Use pilcrow for paragraphsbutton>
p>
3,
<p>Separating paragraphs with blank lines is easiest
for readers to scan, but they can also be separated
by indenting their first lines. This is often used
to take up less space, such as to save paper in print.p>

<p>Writing that is intended to be edited, such as school
papers and rough drafts, uses both blank lines and
indentation for separation. In finished works, combining
both is considered redundant and amateurish.p>

<p>In very old writing, paragraphs were separated with a
special character: ¶, the <i>pilcrowi>. Nowadays, this
is considered claustrophobic and hard to read.p>

<p>How hard to read? See for yourself:
  <button data-toggle-text="Oh no! Switch back!">Use pilcrow for paragraphsbutton>
p>
4,
<p>Separating paragraphs with blank lines is easiest
for readers to scan, but they can also be separated
by indenting their first lines. This is often used
to take up less space, such as to save paper in print.p>

<p>Writing that is intended to be edited, such as school
papers and rough drafts, uses both blank lines and
indentation for separation. In finished works, combining
both is considered redundant and amateurish.p>

<p>In very old writing, paragraphs were separated with a
special character: ¶, the <i>pilcrowi>. Nowadays, this
is considered claustrophobic and hard to read.p>

<p>How hard to read? See for yourself:
  <button data-toggle-text="Oh no! Switch back!">Use pilcrow for paragraphsbutton>
p>
5,
<p>Separating paragraphs with blank lines is easiest
for readers to scan, but they can also be separated
by indenting their first lines. This is often used
to take up less space, such as to save paper in print.p>

<p>Writing that is intended to be edited, such as school
papers and rough drafts, uses both blank lines and
indentation for separation. In finished works, combining
both is considered redundant and amateurish.p>

<p>In very old writing, paragraphs were separated with a
special character: ¶, the <i>pilcrowi>. Nowadays, this
is considered claustrophobic and hard to read.p>

<p>How hard to read? See for yourself:
  <button data-toggle-text="Oh no! Switch back!">Use pilcrow for paragraphsbutton>
p>
6,
<p>Separating paragraphs with blank lines is easiest
for readers to scan, but they can also be separated
by indenting their first lines. This is often used
to take up less space, such as to save paper in print.p>

<p>Writing that is intended to be edited, such as school
papers and rough drafts, uses both blank lines and
indentation for separation. In finished works, combining
both is considered redundant and amateurish.p>

<p>In very old writing, paragraphs were separated with a
special character: ¶, the <i>pilcrowi>. Nowadays, this
is considered claustrophobic and hard to read.p>

<p>How hard to read? See for yourself:
  <button data-toggle-text="Oh no! Switch back!">Use pilcrow for paragraphsbutton>
p>
7,
<p>Separating paragraphs with blank lines is easiest
for readers to scan, but they can also be separated
by indenting their first lines. This is often used
to take up less space, such as to save paper in print.p>

<p>Writing that is intended to be edited, such as school
papers and rough drafts, uses both blank lines and
indentation for separation. In finished works, combining
both is considered redundant and amateurish.p>

<p>In very old writing, paragraphs were separated with a
special character: ¶, the <i>pilcrowi>. Nowadays, this
is considered claustrophobic and hard to read.p>

<p>How hard to read? See for yourself:
  <button data-toggle-text="Oh no! Switch back!">Use pilcrow for paragraphsbutton>
p>
8,
<p>Separating paragraphs with blank lines is easiest
for readers to scan, but they can also be separated
by indenting their first lines. This is often used
to take up less space, such as to save paper in print.p>

<p>Writing that is intended to be edited, such as school
papers and rough drafts, uses both blank lines and
indentation for separation. In finished works, combining
both is considered redundant and amateurish.p>

<p>In very old writing, paragraphs were separated with a
special character: ¶, the <i>pilcrowi>. Nowadays, this
is considered claustrophobic and hard to read.p>

<p>How hard to read? See for yourself:
  <button data-toggle-text="Oh no! Switch back!">Use pilcrow for paragraphsbutton>
p>
9,
p {
  margin: 0;
  text-indent: 3ch;
}

p.pilcrow {
  text-indent: 0;
  display: inline;
}
p.pilcrow + p.pilcrow::before {
  content: " ¶ ";
}
0,
p {
  margin: 0;
  text-indent: 3ch;
}

p.pilcrow {
  text-indent: 0;
  display: inline;
}
p.pilcrow + p.pilcrow::before {
  content: " ¶ ";
}
1,
p {
  margin: 0;
  text-indent: 3ch;
}

p.pilcrow {
  text-indent: 0;
  display: inline;
}
p.pilcrow + p.pilcrow::before {
  content: " ¶ ";
}
2,
p {
  margin: 0;
  text-indent: 3ch;
}

p.pilcrow {
  text-indent: 0;
  display: inline;
}
p.pilcrow + p.pilcrow::before {
  content: " ¶ ";
}
3,
p {
  margin: 0;
  text-indent: 3ch;
}

p.pilcrow {
  text-indent: 0;
  display: inline;
}
p.pilcrow + p.pilcrow::before {
  content: " ¶ ";
}
4,
p {
  margin: 0;
  text-indent: 3ch;
}

p.pilcrow {
  text-indent: 0;
  display: inline;
}
p.pilcrow + p.pilcrow::before {
  content: " ¶ ";
}
5,
p {
  margin: 0;
  text-indent: 3ch;
}

p.pilcrow {
  text-indent: 0;
  display: inline;
}
p.pilcrow + p.pilcrow::before {
  content: " ¶ ";
}
6,
p {
  margin: 0;
  text-indent: 3ch;
}

p.pilcrow {
  text-indent: 0;
  display: inline;
}
p.pilcrow + p.pilcrow::before {
  content: " ¶ ";
}
7,
p {
  margin: 0;
  text-indent: 3ch;
}

p.pilcrow {
  text-indent: 0;
  display: inline;
}
p.pilcrow + p.pilcrow::before {
  content: " ¶ ";
}
8,
p {
  margin: 0;
  text-indent: 3ch;
}

p.pilcrow {
  text-indent: 0;
  display: inline;
}
p.pilcrow + p.pilcrow::before {
  content: " ¶ ";
}
9,
document.querySelector('button').addEventListener('click', (event) => {
  document.querySelectorAll('p').forEach((paragraph) => {
    paragraph.classList.toggle('pilcrow');
  });

  [event.target.innerText, event.target.dataset.toggleText] =
    [event.target.dataset.toggleText, event.target.innerText];
});
0,
document.querySelector('button').addEventListener('click', (event) => {
  document.querySelectorAll('p').forEach((paragraph) => {
    paragraph.classList.toggle('pilcrow');
  });

  [event.target.innerText, event.target.dataset.toggleText] =
    [event.target.dataset.toggleText, event.target.innerText];
});
1 or another

element, or if there is no more content in the parent element and the parent element is not an

document.querySelector('button').addEventListener('click', (event) => {
  document.querySelectorAll('p').forEach((paragraph) => {
    paragraph.classList.toggle('pilcrow');
  });

  [event.target.innerText, event.target.dataset.toggleText] =
    [event.target.dataset.toggleText, event.target.innerText];
});
3 element.Permitted parentsAny element that accepts .Implicit ARIA rolePermitted ARIA rolesAnyDOM interface
document.querySelector('button').addEventListener('click', (event) => {
  document.querySelectorAll('p').forEach((paragraph) => {
    paragraph.classList.toggle('pilcrow');
  });

  [event.target.innerText, event.target.dataset.toggleText] =
    [event.target.dataset.toggleText, event.target.innerText];
});
4

This element only includes the global attributes.

Note: The

document.querySelector('button').addEventListener('click', (event) => {
  document.querySelectorAll('p').forEach((paragraph) => {
    paragraph.classList.toggle('pilcrow');
  });

  [event.target.innerText, event.target.dataset.toggleText] =
    [event.target.dataset.toggleText, event.target.innerText];
});
5 attribute on

tags is obsolete and shouldn't be used.

<p>
  This is the first paragraph of text. This is the first paragraph of text. This
  is the first paragraph of text. This is the first paragraph of text.
p>
<p>
  This is the second paragraph. This is the second paragraph. This is the second
  paragraph. This is the second paragraph.
p>

By default, browsers separate paragraphs with a single blank line. Alternate separation methods, such as first-line indentation, can be achieved with CSS:

<p>Separating paragraphs with blank lines is easiest
for readers to scan, but they can also be separated
by indenting their first lines. This is often used
to take up less space, such as to save paper in print.p>

<p>Writing that is intended to be edited, such as school
papers and rough drafts, uses both blank lines and
indentation for separation. In finished works, combining
both is considered redundant and amateurish.p>

<p>In very old writing, paragraphs were separated with a
special character: ¶, the <i>pilcrowi>. Nowadays, this
is considered claustrophobic and hard to read.p>

<p>How hard to read? See for yourself:
  <button data-toggle-text="Oh no! Switch back!">Use pilcrow for paragraphsbutton>
p>

p {
  margin: 0;
  text-indent: 3ch;
}

p.pilcrow {
  text-indent: 0;
  display: inline;
}
p.pilcrow + p.pilcrow::before {
  content: " ¶ ";
}

document.querySelector('button').addEventListener('click', (event) => {
  document.querySelectorAll('p').forEach((paragraph) => {
    paragraph.classList.toggle('pilcrow');
  });

  [event.target.innerText, event.target.dataset.toggleText] =
    [event.target.dataset.toggleText, event.target.innerText];
});

Breaking up content into paragraphs helps make a page more accessible. Screen-readers and other assistive technology provide shortcuts to let their users skip to the next or previous paragraph, letting them skim content like how white space lets visual users skip around.

Using empty

elements to add space between paragraphs is problematic for people who navigate with screen-reading technology. Screen readers may announce the paragraph's presence, but not any content contained within it — because there is none. This can confuse and frustrate the person using the screen reader.

Why are comment tags helpful when debugging your code?

The comment tag also makes it easier for the developer to come back and understand the code he's written at a later stage. Comments can also used for commenting out lines of code for debugging purposes. It is good practice to add comments to your code, especially when working with a team or at a company.

Why are comment tags helpful when debugging your code quizlet?

Why are comment tags helpful when debugging your code? They will auto-correct errors in your code. They can be used to keep a running list of attempted fixes.

What are tags used for in HTML?

An HTML tag is a piece of markup language used to indicate the beginning and end of an HTML element in an HTML document. As part of an HTML element, HTML tags help web browsers convert HTML documents into web pages.

Which of the following tags correctly denotes a paragraph in an HTML document?

: The Paragraph element. The

HTML element represents a paragraph.